CompTIA 220-1101 Practice Test - Questions Answers, Page 50

The user should check the display settings on the computer and set them to extend/duplicate. This will allow the computer to send the video signal to both the laptop screen and the projector. If the display settings are set to only show on one screen, then the projector may not detect any source. According to the CompTIA Core1 objectives, one of the common display issues is no image on screen. A troubleshooting guide for projectors also suggests checking the display settings as a possible solution for no source found error.

The technician should replace the patch cable that connects the desktop to the network switch or outlet. The patch cable may be damaged or incompatible with the upgraded network infrastructure, which can cause slow network speeds. According to the CompTIA Core1 objectives, one of the common symptoms of a bad cable is slow transfer speeds. A research paper on network performance also states that cable quality and length can affect network speed.

The technician should ensure that a VGA cable is connected properly between the monitor and the computer. A VGA cable is a type of video cable that carries analog signals. If the cable is loose, damaged, or not plugged in correctly, it can cause the monitor to not display any image or show distorted colors. According to the CompTIA Core1 objectives, one of the common display issues is no image on screen. A troubleshooting guide for monitors also recommends checking the VGA cable connection as a possible solution for no signal or blank screen problems.

High availability is a characteristic of cloud computing that prioritizes reliability. High availability means that cloud services can be accessed without interruption or failure, even in the event of a disaster or a hardware malfunction. This is achieved by using redundant components, backup systems, load balancing, and failover mechanisms. According to the CompTIA Core1 objectives, one of the benefits of cloud computing is high availability. A research paper on cloud reliability also defines high availability as the ability to provide continuous service despite faults or failures.

Satellite internet is the most widely available internet connection type, as it does not depend on cables or wires.It can reach remote areas that lack infrastructure for other types of internet connections1.Reference:Satellite Internet

ECC (Error Correcting Code) memory is a type of memory that can detect and correct errors that may occur during data transmission or storage.ECC memory is essential for high-availability computing, as it prevents data corruption and system crashes

Cloud-based backup is the best way to protect the data of a virtual machine, as it allows the data to be stored in a remote location that is accessible from anywhere.Cloud-based backup also provides scalability, security, and reliability for data protection3.Reference:[Cloud Backup]

Calibration is the process of adjusting the printer settings to ensure that the printed output matches the original document. Calibration can fix issues such as misaligned images, color accuracy, and print quality.Reference:[Printer Calibration]

The first thing that the technician should check when troubleshooting a wireless network issue with slow throughput and frequent connection drops is the channel interference. Channel interference is a common cause of poor Wi-Fi performance, as it occurs when multiple wireless networks or devices use the same or overlapping frequency bands, resulting in signal degradation, congestion, or collision. Channel interference can affect both 2.4 GHz and 5 GHz networks, but it is more likely to happen on the 2.4 GHz band, as it has fewer and narrower channels than the 5 GHz band.

To check for channel interference, the technician can use a Wi-Fi analyzer tool, such as the ones found in the web search results123, to scan the wireless environment and identify the best channel to use for the network. A Wi-Fi analyzer tool can display various information, such as the network name (SSID), signal strength (RSSI), channel number, frequency, bandwidth, and security type. The technician can look for the following indicators of channel interference:

High network density: If there are many wireless networks or devices in the vicinity, they may compete for the same or adjacent channels, causing interference and congestion. The technician can look for the number of networks or devices on each channel and avoid the crowded ones.

Channel overlap: If there are wireless networks or devices that use the same or partially overlapping channels, they may interfere with each other and degrade the signal quality. The technician can look for the channel width and frequency of each network and avoid the overlapping ones. For example, on the 2.4 GHz band, the technician should use only the non-overlapping channels 1, 6, and 11, and avoid the channels in between.

Signal interference: If there are other sources of electromagnetic radiation or noise that operate on the same or similar frequency bands as the wireless network, they may interfere with the wireless signals and cause distortion or loss. The technician can look for the signal strength and quality of each network and avoid the ones that are weak or noisy. For example, some common sources of signal interference are microwave ovens, cordless phones, Bluetooth devices, or baby monitors.

To fix the channel interference issue, the technician can try the following solutions:

Change the channel of the wireless network: The technician can use the Wi-Fi analyzer tool to find the least congested and most optimal channel for the network, and then change the channel settings on the router or the access point. The technician should also consider using the 5 GHz band instead of the 2.4 GHz band, as it offers more and wider channels and less interference.

Relocate the router or the access point: The technician can move the router or the access point to a different location, away from potential sources of interference or obstacles that may block or weaken the wireless signals, such as walls, furniture, or metal objects. The technician should also place the router or the access point in a central and elevated position, to provide better coverage and signal quality for the network.

Upgrade the router or the access point: The technician can replace the router or the access point with a newer and more advanced model, that supports the latest Wi-Fi standards, such as Wi-Fi 6 (802.11ax) or Wi-Fi 5 (802.11ac). These standards offer higher data rates, lower latency, and better performance in dense and noisy environments, compared to the older standards, such as Wi-Fi 4 (802.11n) or Wi-Fi 3 (802.11g).

How to Fix Wi-Fi Connection Drops - Lifewire4

How to Fix When Wi-Fi Keeps Disconnecting on Windows 115

How to Fix Wi-Fi Connection Drops - Lifewire6

How to Fix Wi-Fi Connection Drops - Lifewire7

How to Fix Wi-Fi Connection Drops - Lifewire8