Refer to the exhibit. Which action by the router when a packet is sourced from 10.10.10.2 and destined 10.10.10.16?

It uses a route that is similar to the destination address.

It queues the packets waiting for the route to be learned.

It floods packets to all learned next hops.

It uses a route that is similar to the destination address.

What does a switch do when it receives a frame whose destination MAC address is missing from the MAC address table?

It floods the frame unchanged across all remaining ports in the incoming VLAN.

It appends the table with a static entry for the MAC and shuts down the port.

It updates the CAM table with the destination MAC address of the frame.

It changes the checksum of the frame to a value that indicates an invalid frame.

Refer to the exhibit. R1 has just received a packet from host A that is destined to host B. Which route in the routing table is used by R1 to reac B?

10.10.13.0/25 [1/0] via 10.10.10.2

10.10.13.0/25 [108/0] via 10.10.10.10

10.10.13.0/25 [110/2] via 10.10.10.2

10.10.13.0/25 [110/2] via 10.10.10.6

10.10.13.0/25 [1/0] via 10.10.10.2

Refer to the exhibit. Which command must be enable a floating default route on router A?

ip route 0.0.0.0 0.0.0.0 192.168.1.2 10

ip route 0.0.0.0 0.0.0.0 192.168.1.2

ip route 0.0.0.0 0.0.0.0 192.168.1.2 10

ip route 0.0.0.0 0.0.0.0 192.168.2.1 10

What is the purpose of using First Hop Redundancy Protocol on a specific subnet?

forwards multicast hello messages between routers

ensures a loop-free physical topology

filters traffic based on destination IP addressing

sends the default route to the hosts on a network

forwards multicast hello messages between routers

A WLC sends alarms about a rogue AP, and the network administrator verifies that the alarms are caused by a legitimate autonomous AP.

Remove the AP from WLC management.

Place the AP into manual containment.

Remove the AP from WLC management.

Manually remove the AP from Pending state.

Set the AP Class Type to Friendly.

What is the primary purpose of private address space?

conserve globally unique address space

simplify the addressing in the network

limit the number of nodes reachable via the Internet

Refer to the exhibit. The P2P blocking action option is disabled on the WLC.

Enable the Static IP Tunneling option.

Disable the Coverage Hole Detection option.

Check the DHCP Addr. Assignment check box.

Set the P2P Blocking Action option to Forward-UpStream.

What is a reason to configure a trunk port that connects to a WLC distribution port?

Permit multiple VLANs to provide out-of-band management.

Eliminate redundancy with a link failure in the data path.

Allow multiple VLAN to be used in the data path.

Provide redundancy if there is a link failure for out-of-band management.

Permit multiple VLANs to provide out-of-band management.

What is a purpose of traffic shaping?

It enables dynamic flow identification.

It enables policy-based routing.

It provides best-effort service.

What is a characteristics of a collapsed-core network topology?

It enables the core and access layers to connect to one logical distribution device over an EtherChannel.

It allows the core and distribution layers to run as a single combined layer.

It enables the core and access layers to connect to one logical distribution device over an EtherChannel.

It enables all workstations in a SOHO environment to connect on a single switch with internet access.

It allows wireless devices to connect directly to the core layer, which enables faster data transmission.

What is a specification for SSIDS?

They must include one number and one letter.

They are a Cisco proprietary security feature.

They must include one number and one letter.

They define the VLAN on a switch.

How does router R1 handle traffic to the 172.16.1.4/30 subnet?

It load-balances traffic over 172.16.9.5 and 172.16.4.4.

It sends all traffic over the path via 172.16.9.5 using 172.16.4.4 as a backup.

It sends all traffic over the path via 10.0.1.100.

It load-balances traffic over 172.16.9.5 and 172.16.4.4.

It sends all traffic over the path via 172.16.4.4.

Which functionality is provided by the console connection on a Cisco WLC?

secure in-band connectivity for device administration

unencrypted in-band connectivity for file transfers

What determines the sequence in which materials are planned during the material requirements planning (MRP) run?

The low-level code of the materials

The control parameters of the MRP run

The creation date of the materials

The low-level code of the materials

The replenishment lead time of the materials

Which advantage does the network assurance capability of Cisco DNA Center provide over traditional campus management?

Cisco DNA Center leverages YANG and NETCONF to assess the status of fabric and nonfabric devices, and traditional campus management uses CLI exclusively.

Cisco DNA Center correlates information from different management protocols to obtain insights, and traditional campus management requires manual analysis.

Cisco DNA Center handles management tasks at the controller to reduce the load on infrastructure devices, and traditional campus management uses the data backbone.

Cisco DNA Center leverages YANG and NETCONF to assess the status of fabric and nonfabric devices, and traditional campus management uses CLI exclusively.

Cisco DNA Center automatically compares security postures among network devices, and traditional campus management needs manual comparisons.

Refer to the exhibit. Router R14 is in the process of being configured. Which configuration must be used to establish a host route to PC 10?

ip route 10.8065.10 255.255.255.255 10.73.65.66

ip route 10.80.65.10 255.255.255.254 10.80.65.1

ip route 10.8065.10 255.255.255.255 10.73.65.66

ip route 1073.65.65 255.0.0.0 10.80.65.10

ip route 10.73.65.66 0.0.0.255 10.80.65.10

What is the put method within HTTP?

It is a nonldempotent operation.

It replaces data at the destination.

How do TCP and UDP fit into a query-response model?

TCP establishes a connection prior to sending data, and UDP sends immediately.

TCP uses error detection for packets, and UDP uses error recovery.

TCP avoids using sequencing, and UDP avoids using acknowledgments.

TCP encourages out-of-order packet delivery, and UDP prevents re-ordering.

Cisco 200-301 Practice Test 19 - Free Online Exam Questions 721-760

Which interface enables communication between a program on the controller and a program on the networking devices?

Become a Premium Member for full access

Unlock Premium Member

Cisco 200-301 Practice Test 19

Question

Drag and Drop

Hot Area

Cisco 200-301 Practice Tests

Practice Tests