What is a recommended approach to avoid co-channel congestion while installing access points that use the 2.4 GHz frequency?

different nonoverlapping channels

Which function is performed by the collapsed core layer in a two-tier architecture?

marking interesting traffic for data polices

attaching users to the edge of the network

What are two functions of a server on a network? (Choose two)

runs applications that send and retrieve data for workstations that make requests

handles requests from multiple workstations at the same time

achieves redundancy by exclusively using virtual server clustering

runs applications that send and retrieve data for workstations that make requests

handles requests from multiple workstations at the same time

runs the same operating system in order to communicate with other servers

housed solely in a data center that is dedicated to a single client

A port security violation has occurred on a switch port due to the maximum MAC address count being exceeded. Which command must be configured to increment the security-violation count and forward an SNMP trap?

switchport port-security violation restrict

switchport port-security violation access

switchport port-security violation protect

switchport port-security violation restrict

switchport port-security violation shutdown

When using Rapid PVST+, which command guarantees the switch is always the root bridge for VLAN 200?

spanning -tree vlan 200 priority 0

spanning -tree vlan 200 priority 614440

spanning -tree vlan 200 priority 38572422

spanning -tree vlan 200 priority 0

spanning -tree vlan 200 root primary

What is a function of a remote access VPN?

allows the users to access company internal network resources through a secure tunnel

used cryptographic tunneling to protect the privacy of data for multiple users simultaneously

used exclusively when a user is connected to a company's internal network

establishes a secure tunnel between two branch sites

allows the users to access company internal network resources through a secure tunnel

What is a DHCP client?

a host that is configured to request an IP address automatically

a workstation that requests a domain name associated with its IP address

a host that is configured to request an IP address automatically

a server that dynamically assigns IP addresses to hosts.

a router that statically assigns IP addresses to hosts.

Which two functions are performed by the core layer in a three-tier architecture? (Choose two)

Provide uninterrupted forwarding service.

Ensure timely data transfer between layers.

Provide uninterrupted forwarding service.

Police traffic that is sent to the edge of the network.

Provide direct connectivity for end user devices.

Ensure timely data transfer between layers.

Inspect packets for malicious activity.

Refer to the exhibit. A network administrator must permit SSH access to remotely manage routers in a network. The operations team resides on the 10.20.1.0/25 network. Which command will accomplish this task?

no access-list 2699 deny ip any 10.20.1.0 0.0.0.255

access-list 2699 permit udp 10.20.1.0 0.0.0.255

no access-list 2699 deny tcp any 10.20.1.0 0.0.0.127 eq 22

access-list 2699 permit tcp any 10.20.1.0 0.0.0.255 eq 22

no access-list 2699 deny ip any 10.20.1.0 0.0.0.255

What is a practice that protects a network from VLAN hopping attacks?

Change native VLAN to an unused VLAN ID

Configure an ACL to prevent traffic from changing VLANs

Change native VLAN to an unused VLAN ID

Implement port security on internet-facing VLANs

Refer to the exhibit. If OSPF Is running on this network, how does Router2 handle traffic from Site B to 10.10.13.128/25 at Site A?

It is unreachable and discards the traffic.

It load-balances traffic out of Fa0/1 and Fa0/2.

It is unreachable and discards the traffic.

It sends packets out of interface FaO/2.

It sends packets out of interface Fa0/1.

What is the purpose of traffic shaping?

to provide fair queuing for buffered flows

to mitigate delays over slow links

to provide fair queuing for buffered flows

to limit the bandwidth that a flow can use to

be a marking mechanism that identifies different flows

Where does the configuration reside when a helper address Is configured lo support DHCP?

on the router closest to the client

on the router closest to the server

on the router closest to the client

What is a role of wireless controllers in an enterprise network?

centralize the management of access points in an enterprise network

support standalone or controller-based architectures

serve as the first line of defense in an enterprise network

provide secure user logins to devices on the network.

How do servers connect to the network in a virtual environment?

a software switch on a hypervisor that is physically connected to the network

wireless to an access point that is physically connected to the network

a cable connected to a physical switch on the network

a virtual switch that links to an access point that is physically connected to the network

a software switch on a hypervisor that is physically connected to the network

How does a switch process a frame received on Fa0/1 with the destination MAC address of 0e38.7363.657b when the table is missing the address?

It floods the frame to all interfaces except Fa0/1.

lt drops the frame immediately.

It forwards the frame back out of interface Fa0/1.

It floods the frame to all interfaces except Fa0/1.

It holds the frame until the MAC address timer expires and then drops the frame.

What is recommended for the wireless infrastructure design of an organization?

configure the first three access points are configured to use Channels 1, 6, and 11

group access points together to increase throughput on a given channel

configure the first three access points are configured to use Channels 1, 6, and 11

include a least two access points on nonoverlapping channels to support load balancing

assign physically adjacent access points to the same Wi-Fi channel

Refer to the exhibit. What is the result if Gig1/11 receives an STP BPDU?

The port goes into error-disable state

The port transitions to STP blocking

The port transitions to the root port

The port immediately transitions to STP forwarding.

The port goes into error-disable state

Refer to the exhibit. PC1 is trying to ping PC3 for the first time and sends out an ARP to S1 Which action is taken by S1?

It is flooded out every port except G0/0.

It forwards it out interface G0/2 only.

What does a router do when configured with the default DNS lookup settings, and a URL is entered on the CLI?

sends a broadcast message in an attempt to resolve the URL

initiates a ping request to the URL

prompts the user to specify the desired IP address

continuously attempts to resolve the URL until the command is cancelled

sends a broadcast message in an attempt to resolve the URL

What is a benefit of VRRP?

It provides the default gateway redundancy on a LAN using two or more routers.

It provides traffic load balancing to destinations that are more than two hops from the source.

It provides the default gateway redundancy on a LAN using two or more routers.

It allows neighbors to share routing table information between each other.

It prevents loops in a Layer 2 LAN by forwarding all traffic to a root bridge, which then makes the final forwarding decision.

Cisco 200-301 Practice Test 6 - Free Online Exam Questions 201-240

What are two functions of a Layer 2 switch? (Choose two)

A.

acts as a central point for association and authentication servers

B.

selects the best route between networks on a WAN

C.

moves packets within a VLAN

D.

moves packets between different VLANs

E.

makes forwarding decisions based on the MAC address of a packet

Cisco 200-301 Practice Test 6

Question

Cisco 200-301 Practice Tests

Practice Tests