Refer to the exhibit. An architect is managing a wireless network with APs from several branch offices connecting to the WLC in the data center. There is a new requirement for a single WLAN to process the client data traffic without sending it to the WLC. Which action must be taken to complete the request?

Enable FlexConnect Local Switching.

Enable Disassociation Imminent.

Enable FlexConnect Local Switching.

What is the role of SNMP in the network?

to monitor and manage network devices using a UDP underlay that operates on the application layer

to monitor network devices and functions using a TCP underlay that operates on the presentation layer

to collect data directly from network devices using an SSL underlay that operates on the transport layer

to monitor and manage network devices using a UDP underlay that operates on the application layer

to collect telemetry and critical information from network devices using an SSH underlay that operates on the network layer

What are two purposes of HSRP? (Choose two.)

It groups two or more routers to operate as one virtual router.

It improves network availability by providing redundant gateways.

It groups two or more routers to operate as one virtual router.

It improves network availability by providing redundant gateways.

It passes configuration information to hosts in a TCP/IP network.

It helps hosts on the network to reach remote subnets without a default gateway.

It provides a mechanism for diskless clients to autoconfigure their IP parameters during boot.

Refer to the exhibit. A network engineer is configuring a WLAN to connect with the 172.16.10.0/24 network on VLAN 20. The engineer wants to limit the number of devices that connect to the WLAN on the USERWL SSID to 125. Which configuration must the engineer perform on the WLC?

In the WLAN configuration, set the Maximum Allowed Clients value to 125.

In the Management Software activation configuration, set the Clients value to 125.

In the Controller IPv6 configuration, set the Throttle value to 125.

In the WLAN configuration, set the Maximum Allowed Clients value to 125.

In the Advanced configuration, set the DTIM value to 125.

Which (unction generally performed by a traditional network device is replaced by a software-defined controller?

building route tables and updating the forwarding table

encryption and decryption for VPN link processing

building route tables and updating the forwarding table

changing the source or destination address during NAT operations

encapsulation and decapsulation of packets in a data-link frame

Refer to the exhibit. Which IP route command created the best path for a packet destined for 10.10.10.3?

ip route 10.10.10.0 255.255.255.240 g0/0

ip route 10.10.0.0 255.255.252.0 g0/0

ip route 10.0.0.0 255.0.0.0 g0/0

ip route 10.10.10.1 255.255.255.255 g0/0

ip route 10.10.10.0 255.255.255.240 g0/0

What describes the functionality of southbound APIs?

They enable communication between the controller and the network device.

They use HTTP messages to communicate.

They enable communication between the controller and the network device.

They convey information from the controller to the SDN applications.

They communicate with the management plane.

A DHCP pool has been created with the name NOCC. The pool is using 192.168.20.0/24 and must use the next to last usable IP address as the default gateway for the DHCP clients. What is the next step in the process?

network 192.168.20.254 255.255.255.0 secondary

ip default-gateway 0.0.0.0 0.0.0.0 192.168.20.253

Refer to the Exhibit. Refer to the exhibit. After applying this configuration to router R1, a network engineer is verifying the implementation. If all links are operating normally, and the engineer sends a series of packets from PC1 to PC3. how are the packets routed?

They are routed to 172.16.20.2.

They are routed to 192.168.100.2.

They are distributed sent round robin to interfaces SO/0/0 and SO/0/1.

Which components are contained within a virtual machine?

configuration files backed by physical resources from the Hypervisor

physical resources, including the NIC, RAM, disk, and CPU

configuration files backed by physical resources from the Hypervisor

applications running on the Hypervisor

processes running on the Hypervisor and a guest OS

What is the role of the root port in a switched network?

It is the best path to the root from a nonroot switch.

It replaces the designated port when the designated port fails

It is the best path to the root from a nonroot switch.

It replaces the designated port when the root port fails.

It is administratively disabled until a failover occurs.

What does a switch search for in the CAM table when forwarding a frame?

destination MAC address and destination port

source MAC address and aging time

destination MAC address and flush time

source MAC address and source port

destination MAC address and destination port

What happens when a switch receives a frame with a destination MAC address that recently aged out?

The switch floods the frame to all ports in the VLAN except the port that received the frame.

The switch references the MAC address aging table for historical addresses on the port that received the frame.

The switch floods the frame to all ports in all VLANs except the port that received the frame

The switch drops the frame and learns the destination MAC address again from the port that received the frame

The switch floods the frame to all ports in the VLAN except the port that received the frame.

Refer to the exhibit. IPv6 must be implemented on R1 to the ISP The uplink between R1 and the ISP must be configured with a manual assignment, and the LAN interface must be self-provisioned Both connections must use the applicable IPv6 networks Which two configurations must be applied to R1? (Choose two.)

interface Gi0/1 ipv6 address 2001:db8:0F1B:FCCB:ACCE:FCED:ABCD:FA00:/127

interface Gi0/0 ipv6 address 2001:db8:0:AFFF::/64 eui-64

interface Gi0/1 ipv6 address 2001:db8:0F1B:FCCB:ACCE:FCED:ABCD:FA02:/127

interface Gi0/0 ipv6 address 2001:db8:1:AFFF::/64 eui-64

interface Gi0/1 ipv6 address 2001:db8:0F1B:FCCB:ACCE:FCED:ABCD:FA00:/127

interface Gi0/0 ipv6 address 2001:db8:0:AFFF::/64 eui-64

interface Gi0/0 ipv6 address 2001:db8:0F1B:FCCB:ACCE:FCED:ABCD:FA03;/127

In which circumstance would a network architect decide to implement a global unicast subnet instead of a unique local unicast subnet?

when the subnet must be routable over the internet

when the subnet must be available only within an organization

when the subnet does not need to be routable

when the addresses on the subnet must be equivalent to private IPv4 addresses

when the subnet must be routable over the internet

Refer to the exhibit. What does the host do when using the IPv4 Preferred function?

It requests the same IPv4 address when it renews its lease with the DHCP server.

It continues to use a statically assigned IPv4 address

It forces the DNS server to provide the same IPv4 address at each renewal.

It requests the same IPv4 address when it renews its lease with the DHCP server.

It prefers a pool of addresses when renewing the IPv4 host IP address

Which two capabilities of Cisco DNA Center make it more extensible as compared to traditional campus device management? (Choose two.)

REST APIs that allow for external applications to interact natively

SDKs that support interaction with third-party network equipment

REST APIs that allow for external applications to interact natively

adapters that support all families of Cisco IOS software

SDKs that support interaction with third-party network equipment

customized versions for small, medium, and large enterprises

modular design that is upgradable as needed

Cisco 200-301 Practice Test 23 - Free Online Exam Prep & Questions

Refer to the exhibit.

Cisco 200-301 image Question 781 110289 10072024004422000000

Refer to the exhibit. The IPv6 address for the LAN segment on router R1 must be configured using the EUI-64 format. When configured which ipv6 address is produced by the router? O

Become a Premium Member for full access

Unlock Premium Member

Cisco 200-301 Practice Test 23

Question

Cisco 200-301 Practice Tests

Practice Tests